This article describes how to connect to the WGT-11 and configure the network settings according to your infrastructure.
Solution
1. Connect to the WGT-11
There are three ways to connect to the WGT-11:
A. Connection via Wi-Fi
- Connect to the Wi-Fi (SSID):
rational-xxxxxx - Password:
rational1234 - Open the following address in your browser:
http://10.130.1.1
B. Connection via the LAN Network
- Connect to the local network where the WGT-11 is located
- Determine the via DHCP assigned IP address of the WGT-11 (e.g., via the router)
- Open the following address in your browser:
http://IP-ADDRESS-OF-THE-WGT-11
C. Direct Connection via Network Cable
- Connect your notebook directly to the WGT-11 using an RJ45 network cable
- Configure the network interface of your notebook as follows:
- IP Address:
172.31.255.253 - Subnet Mask:
255.255.255.252
- IP Address:
- Open the following address in your browser:
http://172.31.255.254
2. Login
- Username:
root - Password:
dragino
(or use your own credentials)
3. Configure Network Settings
- Navigate to:
Network → Network - By default, the WGT-11 is set to DHCP.
- Change the 'Mode' to 'Static' and adjust the network settings accordingly
- Save the changes: Click Save & Apply
4. Example View
Next Steps
After successful configuration, you can use the gateway in your network and continue configuring it via the assigned IP address if needed.
